The title says it all.
- Formiculture.com
- Forums
- Gallery
- Members
- Member Map
- Chat
The title says it all.
Go to the ant, you sluggard; consider its ways and be wise! It has no commander, no overseer or ruler, yet it stores its provisions in summer and gathers its food at harvest. -Proverbs 6: 6-8
My Nationwide Ant Shop Here I have PPQ-526 permits to ship ants nationwide
Attention Ant-Keepers in South Dakota! Join the SoDak(Society Of Dakotan Ant Keepers)
You know, you could use Hydrostone instead of grout. It may just be cheaper.
"God made..... all the creatures that move along the ground according to their kinds (including ants). And God saw that it was good. Genesis 1:25 NIV version
Keeping:
Formica cf. pallidefulva, cf. incerta, cf. argentea
Formica cf. aserva, cf. subintegra
Myrmica sp.
Lasius neoniger, brevicornis
let me check it out.
what does everyone else think?
Go to the ant, you sluggard; consider its ways and be wise! It has no commander, no overseer or ruler, yet it stores its provisions in summer and gathers its food at harvest. -Proverbs 6: 6-8
My Nationwide Ant Shop Here I have PPQ-526 permits to ship ants nationwide
Attention Ant-Keepers in South Dakota! Join the SoDak(Society Of Dakotan Ant Keepers)
Hey Ants Dakota. Grout is basically just cement, water and really fine sand. If you want to increase its ability to hold water, you can add eg vermiculite, perlite, coconut fibre etc. Then it's probably going to be cheaper to go with cement rather than grout.
I've been making my own firebricks out of cement, water and vermiculite. Ratio I'm using if anyone's interested is 1.5 : 1 : 2 water: cement: vermiculite by volume. It's very easy to carve. I'm at the early stages of experimenting with this and wondered whether anyone else had made their own firebricks.
Edit: Actually thinking about it, Crystal is effectively making vermcrete by adding vermiculite to grout.
Edited by steelplant, May 15 2020 - 4:37 AM.
I made some attempts to make my own AAC with shaving foam, concrete, and water. My most successful attempt was when I made a block that was pretty porous. There was a film of powder on it, that would be no doubt toxic to the ants, so I scrapped it. Another mistake was that I used concrete, not cement, so there were rocks and gravel in it that weakened the whole thing. Of course, the homemade AAC isn't as good as the real stuff made from lime, cement, and aluminum for porousness. There is a whole community for homemade AAC that uses a foam generator with dish soap instead of shaving cream.
Check out my Youtube Channel! https://www.youtube....xh-HaScAuE5CShQ
Check out my Crematogaster Journal! https://www.formicul...e-2#entry141180
Thanks Temperateants. Interesting to hear your experience. Making foamcrete looks like a blast, and a great material if non toxic. Didn't realise this stuff's used for sound insulation, so maybe it makes things quieter for the ants as well. I'm new to making these so going 0-60 as fast as I can to get things cured and tested before the summer flights.
Thanks Temperateants. Interesting to hear your experience. Making foamcrete looks like a blast, and a great material if non toxic. Didn't realise this stuff's used for sound insulation, so maybe it makes things quieter for the ants as well. I'm new to making these so going 0-60 as fast as I can to get things cured and tested before the summer flights.
I'm not sure if there is any residue of powder or soap that would be extremely toxic. If you have a really large colony you could make a small prototype and move some of the brood and workers in (obviously not the queen) and then test it. For it to fully cure I think you would need to soak it, to also get all those chemicals out.
Check out my Youtube Channel! https://www.youtube....xh-HaScAuE5CShQ
Check out my Crematogaster Journal! https://www.formicul...e-2#entry141180
Grout is cheaper than hydrostone and needs no additives. The downside is that it absorbs water slower than other materials. Read the tutorials Crystals made about how to make formicariums with it.
I did do that, and it was really helpful.
Go to the ant, you sluggard; consider its ways and be wise! It has no commander, no overseer or ruler, yet it stores its provisions in summer and gathers its food at harvest. -Proverbs 6: 6-8
My Nationwide Ant Shop Here I have PPQ-526 permits to ship ants nationwide
Attention Ant-Keepers in South Dakota! Join the SoDak(Society Of Dakotan Ant Keepers)
Thanks Temperateants. Interesting to hear your experience. Making foamcrete looks like a blast, and a great material if non toxic. Didn't realise this stuff's used for sound insulation, so maybe it makes things quieter for the ants as well. I'm new to making these so going 0-60 as fast as I can to get things cured and tested before the summer flights.
I'm not sure if there is any residue of powder or soap that would be extremely toxic. If you have a really large colony you could make a small prototype and move some of the brood and workers in (obviously not the queen) and then test it. For it to fully cure I think you would need to soak it, to also get all those chemicals out.
Hey Temperateants, thanks for your reply. I'm just misting the curing nests with water (vermcrete and coircrete) several times a day. Do I need to actually submerge them in water to cure please?
Thanks Temperateants. Interesting to hear your experience. Making foamcrete looks like a blast, and a great material if non toxic. Didn't realise this stuff's used for sound insulation, so maybe it makes things quieter for the ants as well. I'm new to making these so going 0-60 as fast as I can to get things cured and tested before the summer flights.
I'm not sure if there is any residue of powder or soap that would be extremely toxic. If you have a really large colony you could make a small prototype and move some of the brood and workers in (obviously not the queen) and then test it. For it to fully cure I think you would need to soak it, to also get all those chemicals out.
Hey Temperateants, thanks for your reply. I'm just misting the curing nests with water (vermcrete and coircrete) several times a day. Do I need to actually submerge them in water to cure please?
I've heard you can do that if certain chemical reactions haven't neutralized.
Check out my Youtube Channel! https://www.youtube....xh-HaScAuE5CShQ
Check out my Crematogaster Journal! https://www.formicul...e-2#entry141180
Thanks Temperateants. Interesting to hear your experience. Making foamcrete looks like a blast, and a great material if non toxic. Didn't realise this stuff's used for sound insulation, so maybe it makes things quieter for the ants as well. I'm new to making these so going 0-60 as fast as I can to get things cured and tested before the summer flights.
I'm not sure if there is any residue of powder or soap that would be extremely toxic. If you have a really large colony you could make a small prototype and move some of the brood and workers in (obviously not the queen) and then test it. For it to fully cure I think you would need to soak it, to also get all those chemicals out.
Hey Temperateants, thanks for your reply. I'm just misting the curing nests with water (vermcrete and coircrete) several times a day. Do I need to actually submerge them in water to cure please?
I've heard you can do that if certain chemical reactions haven't neutralized.
Cheers mate - thanks for your help.
|
Ant Keeping →
Ant Keeping Journals →
Ants_Dakota's Pogonomyrmex occidentalis JournalStarted by Ants_Dakota , Oct 16 2024 ants_dakota, south dakota and 7 more... |
|
|
|
|
Answered
Anting →
Ant ID Requests →
Black Hills South Dakota 10/14/24, possibly Formica argenteaStarted by Ants_Dakota , Oct 14 2024 formica, formica id, ants_dakota and 5 more... |
|
|
|
Anting →
Ant ID Requests →
ID wantedStarted by cooIboyJ , Oct 1 2024 id, ids, wanted, needed, ants and 3 more... |
|
|
||
Ant Keeping →
General Ant Keeping →
What do you thinkStarted by AntsGodzilla , Sep 26 2024 formicarium, ants, perfect cast |
|
|
||
Anting →
General Anting →
Messor barbarus adopting queenStarted by OliveOilGuy , Sep 23 2024 ants, queen, addoption and 3 more... |
|
|
0 members, 1 guests, 0 anonymous users