Jump to content

  • Chat
  •  
  •  

Welcome to Formiculture.com!

This is a website for anyone interested in Myrmecology and all aspects of finding, keeping, and studying ants. The site and forum are free to use. Register now to gain access to all of our features. Once registered and logged in, you will be able to create topics, post replies to existing threads, give reputation points to your fellow members, get your own private messenger, post status updates, manage your profile and so much more. If you already have an account, login here - otherwise create an account for free today!

Photo

Heating Cable

camponotous

  • Please log in to reply
8 replies to this topic

#1 Offline Temperateants - Posted September 4 2019 - 4:32 PM

Temperateants

    Advanced Member

  • Members
  • PipPipPip
  • 436 posts

Hi all, this is my first post on this forum. This whole year, there have been a few unusually cool days in spring in summer, so I am considering getting a heating cable for my camponotous. I read a few articles, and what I picked up was that you should put the cable on the dry end of the test tube and give the ants a heat gradient. In addition, to experiment with their preferences. Can someone corrorborate that statement? I have a few questions.

  • How much do they speed up growth of ants?
  • Do they increase mold growth?
  • what is an acceptable wattage
  • And finally, how much does this increase the need for feeding?

Is there anything else I need to know? Any help would be much appreciated.

Thanks.


  • jcisopodgang likes this

Check out my Youtube Channel! https://www.youtube....xh-HaScAuE5CShQ

Check out my Crematogaster Journal! https://www.formicul...e-2#entry141180

 

 


#2 Offline Canadant - Posted September 5 2019 - 12:48 PM

Canadant

    Advanced Member

  • Members
  • PipPipPip
  • 461 posts
  • LocationNova Scotia, Canada
My cable is 15 watts. Put it on one side so the ants can regulate the temp themselves. Sometimes they're close and other times they move slightly. I didn't find it sped up the growth that much but it does apparently. Mold? didn't have issues. However, I did get some slight condensation when just filling my hybrid nest 1.0. Turned off cable and waited a day. No probs. Feed? As the colony grows so does feeding.

Be careful as well. I accidentally killed a queen because I set the cable lengthwise along her test tube. didn't take long.

My cable was long too. So you might have excess.

My camponotus seem to like it. I would heat all my queens in tubes too, but my space is limited where my ants are.

I found it a good purchase.
  • Temperateants likes this
"You don't get what you want. You get what you deserve".

#3 Offline Temperateants - Posted September 5 2019 - 12:55 PM

Temperateants

    Advanced Member

  • Members
  • PipPipPip
  • 436 posts

Thanks for the reply! Do you have the link to the purchase?


Check out my Youtube Channel! https://www.youtube....xh-HaScAuE5CShQ

Check out my Crematogaster Journal! https://www.formicul...e-2#entry141180

 

 


#4 Offline Antennal_Scrobe - Posted September 5 2019 - 1:44 PM

Antennal_Scrobe

    Advanced Member

  • Members
  • PipPipPip
  • 933 posts
  • LocationMilwaukee, Wisconsin

Zoo Med Repti Heat Cable 15 Watt 11.5 feet (3.5m) length. Just got it from Tarheel Ants. My Tetramorium flocked to the corner of the outworld that it was up against, so I moved it around a bit to make it touch their favorite nesting spot instead. That's what you should do; have your setups a somewhat conservative distance from the cable and then move them closer or further depending on what the ants do.


Currently keeping:

 

Tetramorium immigrans, Pogonomyrmex occidentalis

Myrmica punctiventris, Formica subsericea

Formica pallidefulva, Aphaeogaster cf. rudis

Camponotus pennsylvanicus

Camponotus nearcticus

Crematogaster cerasi

Temnothorax ambiguus

Prenolepis imparis


#5 Offline Canadant - Posted September 5 2019 - 2:14 PM

Canadant

    Advanced Member

  • Members
  • PipPipPip
  • 461 posts
  • LocationNova Scotia, Canada

Thanks for the reply! Do you have the link to the purchase?


Same as antennal_scrobe's heating cable.
  • Antennal_Scrobe likes this
"You don't get what you want. You get what you deserve".

#6 Offline Temperateants - Posted September 5 2019 - 4:00 PM

Temperateants

    Advanced Member

  • Members
  • PipPipPip
  • 436 posts

Thanks for all of the replies!


Check out my Youtube Channel! https://www.youtube....xh-HaScAuE5CShQ

Check out my Crematogaster Journal! https://www.formicul...e-2#entry141180

 

 


#7 Offline Temperateants - Posted September 5 2019 - 4:02 PM

Temperateants

    Advanced Member

  • Members
  • PipPipPip
  • 436 posts

How do you moderate the temperature of the heating cable? Do you use a thermostat?


Check out my Youtube Channel! https://www.youtube....xh-HaScAuE5CShQ

Check out my Crematogaster Journal! https://www.formicul...e-2#entry141180

 

 


#8 Offline Antennal_Scrobe - Posted September 5 2019 - 4:08 PM

Antennal_Scrobe

    Advanced Member

  • Members
  • PipPipPip
  • 933 posts
  • LocationMilwaukee, Wisconsin

You don't need to. It only heats things about 10 degrees. Just make sure you are home to watch your ants closely for several hours after you set it up, in case they want to be closer or further.


Currently keeping:

 

Tetramorium immigrans, Pogonomyrmex occidentalis

Myrmica punctiventris, Formica subsericea

Formica pallidefulva, Aphaeogaster cf. rudis

Camponotus pennsylvanicus

Camponotus nearcticus

Crematogaster cerasi

Temnothorax ambiguus

Prenolepis imparis


#9 Offline MrPurpleB - Posted September 5 2019 - 4:12 PM

MrPurpleB

    Advanced Member

  • Members
  • PipPipPip
  • 307 posts
  • LocationLos Angeles, CA
I use a heating cable, I think it's 15 watts from zoo med. I don't have any form of regulator to control the temperature, but I just leave the cable on one end of the test tube or setup. I think you can buy themostats to control the temperature. I have seen lots of thermostats for reptiles. My ants don't seem to care for the cable, and usually go away from the cable. It depends on the location of the ants.

You can put the cable in the middle of setup and move it closer or further away from the setup depending on how the ants react. If the ants move away from the cable you probably want to move the cables further to the edge. Similarly, when the ants move closer to the cable, move the cable closer to the center. I either saw this on a YouTube video or forum post, so I thank them for this info.
  • Antennal_Scrobe likes this





Also tagged with one or more of these keywords: camponotous

2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users